Monthly archive for May2016

Building a Home Arcade Machine Part 22 – Issues to watch out for

Building a Home Arcade Machine Part 22 – Issues to watch out for

When I started this project I really didn’t know what I was going to end up with. I was taking a gamble as I didn’t have much experience making physical things with my hands. All in all I am extremely pleased, nay over the moon,…

Continue reading →

Building a Home Arcade Machine Part 21 – Setting up MAME

Building a Home Arcade Machine Part 21 – Setting up MAME

The cabinet is all built, the electronics are all working, so it’s now just a matter of setting up the Raspberry Pi with the correct software and games. I’ll be totally honest and say that I ended up having this done for me. Not because…

Continue reading →

Building a Home Arcade Machine Part 20 – Installing the electronics

Building a Home Arcade Machine Part 20 – Installing the electronics

For this post about the electronics, I’m going to cover everything including the joysticks, buttons, all the wiring, the power in general and just how everything works. I really don’t have too much experience with electrical wiring etc but my neighbour is an electrician so…

Continue reading →

Building a Home Arcade Machine Part 19 – The Marquee

Building a Home Arcade Machine Part 19 – The Marquee

The marquee was another area that I had problems researching how other people had done it, and the arcades that I saw down our local seafront all seemed to be made in different ways. So I kind of had to work out for myself how…

Continue reading →

Building a Home Arcade Machine Part 18 – Making the bezel

Building a Home Arcade Machine Part 18 – Making the bezel

I was pretty meticulous with my planning for the whole cabinet, and I mocked up everything before I did it, but the bezel was one element that I really couldn’t get my head round before the bulk of the arcade was made. I couldn’t work…

Continue reading →

Building a Home Arcade Machine Part 17 – The TV Monitor

Building a Home Arcade Machine Part 17 – The TV Monitor

Right from the start one of the key parts of the arcade machine that I was thinking about was the TV monitor. I always wanted to use a CRT instead of a flatscreen. I felt pretty strongly about that. I just like the curve and…

Continue reading →

Building a Home Arcade Machine Part 16 – Adding all the T-moulding

Building a Home Arcade Machine Part 16 – Adding all the T-moulding

Most arcades generally have t-moulding (or t-molding) around all the edges. It’s a rubber edging which really makes the machine seem much more professional. The ’T’ refers to the cross-section ridge which sticks into a pre-cut slot on the edges of your arcade machine. T-moulding…

Continue reading →

Building a Home Arcade Machine Part 15 – Printing and applying the vinyl

Building a Home Arcade Machine Part 15 – Printing and applying the vinyl

After making the artwork the next question was where to get the vinyl stickers printed. I was always thinking I was going to get the vinyl printed at GameOnGrafix.com in the US. They are arcade artwork specialists and everyone seems to use them. They’re also…

Continue reading →

Building a Home Arcade Machine Part 14 – Artwork

Building a Home Arcade Machine Part 14 – Artwork

Right from the start I was excited about creating the artwork for the cabinet. One issue with artwork and design, however, is that I’m normally so full of ideas for things that I take ages deciding on what design I want. There are so many…

Continue reading →

Captain America: Civil War leaps to the top of my Marvel Cinematic Universe rankings

Captain America: Civil War leaps to the top of my Marvel Cinematic Universe rankings

I saw Captain America: Civil War this week and absolutely loved it. Perhaps it’s because it’s fresh in my mind but right now it’s on top of my Marvel Studios movie rankings. It’s certainly top 3 anyway and I’m more than happy having it at…

Continue reading →

Page 1 of 2 1 2